Accommodated by hangers and hooks in upper cabinet
Quantity and tools included
10 Awl, Scratch, Asst.
25 Blade, Coping Saw, Pin End, pk/4
40 Blade, Hack Saw, 10"L
3 Caliper, Inside 6"-8"
3 Caliper, Outside 6"-8"
5 Chisel, Cold, Asst.
6 Chisel, Wood, Asst.
5 Clamp, Bar, 24"
10 Clamp, C, Asst.
6 Clamp, Handscrew, Asst.
1 Countersink, 3⁄4" Diameter
2 Divider, 6"L, 6-3⁄8" Opening
6 Drill & Countersink, Asst.
1 Drill Bit, HSS, 1⁄16"-1⁄2", 29 pc.
2 Drill, Hand, 9-1⁄4"L, 1⁄4" Cap
1 Hex Key Set, Fractional, 18 pc.
27 File Handle, #6
6 File, Card & Brush Cleaner, 10"L
4 File, Flat, 10"L, Asst.
5 File, Half Round, 10"L, Asst.
6 File, Mill, 10"L, Asst.
4 File, Round, 10"L, Asst.
1 File, Square, Bastard Cut, 10"L
1 File, Three Square, Bastard Cut, 10"L
3 Gauge, Center, 60°
2 Gauge, Marking, Adjustable, 6"
1 Gauge, Tap & Drill
8 Hammer, Ball Pein, Asst.
8 Hammer, Curved Claw, 16 oz.
1 Level, Aluminum, 24"
2 Mallet, Rubber, 32 oz.
2 Micrometer, Outside, 0-1" and 1-2"
10 Nail Sets, Assorted
1 Oiler, Flexible Spout, 16 oz.
2 Plane, Block, 1-3⁄8" Cut
2 Plane, Jack, 14"
2 Plane, Smooth, 2" Cut
2 Pliers, Slip Joint, 6"L
4 Punch, Center, 3⁄32"-5⁄32
6 Rasp, Wood, 10"L, Asst.
4 Rivet, Sets, Asst.
14 Rule, Steel, Asst.
2 Saw, Back, 14"L
1 Saw, Compass, 12"L
8 Saw, Coping, Pin End, 6-1⁄2" L
3 Saw, Hack, Adjustable
8 Saw, Hand, 20"L
12 Screwdriver, Phillips Tip, Asst.
18 Screwdriver, Standard Tip, Asst.
1 Seamer, Hand, 8-3⁄4" OAL
2 Snips, Aviation, 9-3⁄4"L
3 Snips, Pattern, Straight, 11"L
1 Soldering, Iron, 200 Watt
1 Square, Aluminum, 24"L
1 Square, w/Protractor Head, 12"L
6 Square, Try, Stainless, 8" Blade
1 Stone, Bench, Coarse & Fine
1 Tap & Die, SAE 41 pc.
2 Tape Rule, 1⁄2" x 12’
4 T-Bevel, Sliding, 10"
1 V-Blocks & Clamp Set, 1-1⁄4" Cap.
4 Wrench, Adjustable, Asst.
4 Wrench, Pipe, 8"-18", Asst.
