Maple tool cabinets constructed of solid maple and maple veneers
Cabinet is built with 1" thick plywood sides and 1⁄4" plywood back for strength and durability
Top portion of the cabinet, including the locking doors, is lined with 1⁄4" pegboard; the unit
includes the appropriate hook assortment
Bottom portion of the cabinet, including locking doors, contains three adjustable shelves and one
fixed bottom for storing large items or tote trays that are included with the cabinet
Overall dimensions: 60"W x 22"D x 84"H
Tool cabinet is shipped assembled, tools shipped separately
10 Awl, Scratch, Asst.
25 Blade, Coping Saw, Pin End, pk/4
40 Blade, Hack Saw, 10"L
3 Caliper, Inside 6"-8"
3 Caliper, Outside 6"-8"
5 Chisel, Cold, Asst.
6 Chisel, Wood, Asst.
5 Clamp, Bar, 24"
10 Clamp, C, Asst.
6 Clamp, Handscrew, Asst.
1 Countersink, 3⁄4" Diameter
2 Divider, 6"L, 6-3⁄8" Opening
6 Drill & Countersink, Asst.
1 Drill Bit, HSS, 1⁄16"-1⁄2", 29 pc.
2 Drill, Hand, 9-1⁄4"L, 1⁄4" Cap
1 Hex Key Set, Fractional, 18 pc.
27 File Handle, #6
6 File, Card & Brush Cleaner, 10"L
4 File, Flat, 10"L, Asst.
5 File, Half Round, 10"L, Asst.
6 File, Mill, 10"L, Asst.
4 File, Round, 10"L, Asst.
1 File, Square, Bastard Cut, 10"L
1 File, Three Square, Bastard Cut, 10"L
3 Gauge, Center, 60°
2 Gauge, Marking, Adjustable, 6"
1 Gauge, Tap & Drill
8 Hammer, Ball Pein, Asst.
8 Hammer, Curved Claw, 16 oz.
1 Level, Aluminum, 24"
2 Mallet, Rubber, 32 oz.
2 Micrometer, Outside, 0-1" and 1-2"
10 Nail Sets, Assorted
1 Oiler, Flexible Spout, 16 oz.
2 Plane, Block, 1-3⁄8" Cut
2 Plane, Jack, 14"
2 Plane, Smooth, 2" Cut
2 Pliers, Slip Joint, 6"L
4 Punch, Center, 3⁄32"-5⁄32
6 Rasp, Wood, 10"L, Asst.
4 Rivet, Sets, Asst.
14 Rule, Steel, Asst.
2 Saw, Back, 14"L
1 Saw, Compass, 12"L
8 Saw, Coping, Pin End, 6-1⁄2" L
3 Saw, Hack, Adjustable
8 Saw, Hand, 20"L
12 Screwdriver, Phillips Tip, Asst.
18 Screwdriver, Standard Tip, Asst.
1 Seamer, Hand, 8-3⁄4" OAL
2 Snips, Aviation, 9-3⁄4"L
3 Snips, Pattern, Straight, 11"L
1 Soldering, Iron, 200 Watt
1 Square, Aluminum, 24"L
1 Square, w/Protractor Head, 12"L
6 Square, Try, Stainless, 8" Blade
1 Stone, Bench, Coarse & Fine
1 Tap & Die, SAE 41 pc.
2 Tape Rule, 1⁄2" x 12’
4 T-Bevel, Sliding, 10"
1 V-Blocks & Clamp Set, 1-1⁄4" Cap.
4 Wrench, Adjustable, Asst.
4 Wrench, Pipe, 8"-18", Asst.
